Step 1:  Type  Services in the Search Bar to the right of the Windows icon in the lower-left corner of your screen.

Step 2: Scroll to the bottom.  Double-click Wired AutoConfig



Step 5:  In the Wired AutoConfig Properties window, select Startup Type: Automatic from the drop-down menu. Go to Service Status, and click Start.  Click Apply. then OK.



Step 3:  Go to Control Panel-->Network and Sharing Center--> Click Connections: Ethernet.

Step 7:  Local Area Connection Properties

In the Authentication tab, configure the following:

• Select ‘Enable IEEE 8021x authentication'.
• Select  ‘Remember my credentials for this connection each time I’m logged on’.
• Select ‘Fallback to unauthorized network access’.

Choose a network authentication method:

• Select Microsoft Protected EAP (PEAP) from the drop-down menu. Click Settings.

Step 9:  Protected EAP Properties
Select Verify the server certificate

In the Trusted Root Certification Authorities section,  select ‘UserTrust RSA Certification Authority’. 
Select Authentication Method > Secured Password (EAP-MSCHAPv2)
Select Enable Fast Reconnect



Click Configure...
Make sure the box in this window is unchecked as shown in the image below.

click OK and click OK again.

Step 10: Back in the window with the title Ethernet Properties click on Advanced settings > select Specify authentication mode. From the drop-down menu, select User authentication.  



Click Save Credentials.  Type your NetID and NetID password. Click OK until you exit the settings menus.