Manually Configure a Windows Workstations to Connect to the RiceNet3 Wired Network with PEAP MSCHAPv2
This document describes how to manually configure a Windows workstation to connect to the RiceNet3 wired network with PEAP MSCHAPv2. Valid Rice NETID credentials are required. This article is intended for use by Rice staff, students, and faculty.
Step 1: Go to the Control Panel, select View by: Small icons.
Step 2: Double click on Administrative Tools.
Step 3: Double click Services
Step 4: Scroll to the bottom. Double click Wired AutoConfig
Step 5: In the Wired AutoConfig Properties window, select Startup Type: Automatic from the drop-down menu. Go to Service Status, click Start. Click Apply. then OK.
Step 6: Go to Control Panel-->Network and Internet-->View network status and tasks. Click Connections: Ethernet. Select Properties.
Step 7: Local Area Connection Properties
In the Authentication tab, configure the following:
- Select ‘Enable IEEE 8021x authentication'.
- Select ‘Remember my credentials
for this connection each time I’m logged on’.
- Select ‘Fallback to
unauthorized network access’.
Choose a network authentication method:
- Select Microsoft Protected EAP (PEAP) from the drop-down menu.
Step 9: Protected EAP Properties
Select Verify the server certificate
In the Trusted Root Certification Authorities section, select ‘AddTrust External CA
Select Authentication Method > Secured Password (EAP-MSCHAPv2)
Select Enable Fast Reconnect
Do not select Automatically use my Windows logon name and password (and domain if any)
: Advanced settings > select Specify authentication mode
. From the drop-down menu
, select user authentication
Click Save Credentials
. Type your NetID and NetID password. Click OK until you exit the settings menus.